Skip to content
Frequently Asked Questions

AlignOps FleetWatcher FAQs

Trucking, heavy equipment and material flow for paving and heavy civil contractors. Want to see how FleetWatcher fits your fleet and plants? Talk to our team.

Project managers, fleet managers and owners evaluating AlignOps FleetWatcher tend to ask the same questions: how load cycles and e-tickets work, what hardware drivers and trucks need, how pricing and contract terms work, and how fast it pays for itself. You'll find straight answers below, organized by role. For questions about AlignOps as a company or our other products, use the links below.

AlignOps BusyBusy FAQs

Learn more about BusyBusy: GPS time tracking, job costing, payroll exports, kiosk mode, and pricing for contractors with hourly field crews.

AlignOps ToolWatch FAQs

Learn more about ToolWatch: Tool and equipment tracking, Bluetooth and GPS tags, job cost charge-backs, packages and implementation.

AlignOps FAQs

Learn more about AlignOps: how the four products fit together, contracts and billing, integrations, security and support.

AlignOps SafetyReports FAQs

Learn more about SafetyReports: Inspections, toolbox talks, JSAs, OSHA logs, licensing and onboarding for safety teams.

Find the answers you need, based on the work you do.

Paving / Project Manager

Yes, two ways. Drivers can use the driver app on their own phone or tablet: they tap "start driving" and it runs in the background all day. Trucks you use regularly can get a plug-and-play cigarette-lighter device with a backup battery and no install.

Yes. Load cycle analysis splits each truck's cycle into time at the plant, travel to the job, time at the paver and the trip back. A device on the paver creates moving zones that separate waiting from dumping, so you can see whether delays come from the plant, the crew or the trucks, and set alerts when a truck waits too long.

Yes. AlignOps FleetWatcher connects to your plant's loadout or scale system (reps named JWS, Command Alcon, Apex and Weber). Each ticket arrives as soon as it prints and is matched automatically to the truck and project. Plants you own are straightforward; third-party plants depend on their cooperation.

It replaces the whiteboard, spreadsheets, texts and calls with one dispatch board. Foremen order trucks from the field app, dispatchers fill orders, and drivers are notified by text, email or app. Brokers confirm their trucks through a link, and everything leaves an audit trail of who was scheduled and who showed up on time.

Customers run from 5–10 trucks a day to 300–400, mainly paving, asphalt, aggregates and heavy civil. References are available, and the team can connect you directly with a current customer.

Drivers without a device in their truck use the driver app on an Apple or Android phone or tablet, usually their own. Trucks with a device or an existing GPS integration need nothing from the driver. Foremen and mechanics use the field app, and the office uses the website.

An onboarding specialist acts as your project manager, with weekly virtual working sessions. Training covers admin setup, hardware installation and pre-season driver sessions at no extra cost. Most customers are up and running in about 90 days, then work with a dedicated customer success manager.

Yes. Flag projects as DOT projects and give each inspector a login that shows only their projects. On the web or mobile app they view e-tickets live, accept or reject loads, enter temperatures, record wasted tons and add notes, with CSV export. DOT inspector training is available.

When the plant is integrated, tickets come in automatically and drivers do nothing. For plants that aren't integrated, drivers enter a manual ticket in the app with material, tonnage and ticket number.

Real-time control over trucking, material delivery and plant-to-paver coordination for asphalt and paving contractors. Load cycle analysis, dispatch, e-ticketing and hauler pay work together, so trucks keep hauling instead of sitting idle.

Paving contractors switch when trucking costs and delays start eating margins. With an idle truck costing close to $1,000 a day, seeing cycle and wait times in real time lets them cut excess trucks and keep the paver moving.

In the first season, crews see exactly where trucks wait (at the plant, at the paver or on the road) and match the number of trucks to production. As a rule of thumb, customers cut hired trucking by 10–20%.

A paving and heavy civil solution. AlignOps FleetWatcher ties trucks, plants, crews and heavy equipment to the project, so you manage production and cost per ton, not just dots on a map.

Equipment / Fleet Manager

The camera and GPS are one plug-in unit, either forward-facing or forward plus cab-facing. You can watch live video and pull footage from any trip; the camera keeps about 100 hours of rolling footage. AI flags distraction, phone use, rolling stops, seatbelt use and harsh braking, saves the clip, and can give the driver an in-cab voice warning. No audio is recorded.

Trucks and equipment from 2010 or newer plug into the engine port with a model-specific harness. Older machines use a 3-wire hardwire that still captures hours and productivity, and a transferable magnetic unit is available. Most customers self-install in about 20–30 minutes per unit after training; paid on-site installation is available.

Yes. Using engine RPM, AlignOps FleetWatcher separates productive time from idle time and reports runtime, hour meters, miles and fuel burned (active vs. idle) by asset and by project, with idle and after-hours alerts.

Partly. Preventive maintenance runs on hour and mileage intervals, with items turning yellow when due and red when overdue, and alerts to your shop. A fault-code report sends alerts, and items flagged on inspections go to mechanics, who resolve them in the app. Service history stays with each asset.

AlignOps FleetWatcher can pull data from most OEM portals and existing GPS systems into one dashboard. Its focus is the project: how trucks, crews and plants perform together, not just dots on a map. OEM feeds may update only once or twice a day, so AlignOps FleetWatcher devices are recommended for accurate job-site time.

Yes. Draw a geozone on the map and reuse it. Equipment that stays in a project geozone for about 10 minutes is assigned to that project automatically, and trucks are assigned by the project or order number on their scale ticket.

DVIRs are built in: drivers complete pre- and post-trip inspections in the app with your checklists, readings, photos and notes, and failed items go straight to maintenance. ELDs come through a partner that runs on AlignOps FleetWatcher devices.

AI cameras flag harsh braking, rolling stops, speeding, phone use, distraction and seatbelt use. A driver safety scorecard and leaderboard track harsh braking, acceleration and speeding. Your company decides which events trigger alerts and how many points each carries.

Owner / Finance

Pricing is per unit per month, for each device or driver app, with a lower rate for trucks connected through your existing GPS. It includes all modules, training, support, integrations and unlimited users. Billing is quarterly on a 3-year agreement, with lower rates at volume. E-ticketing on its own is priced per plant.

Yes for hauler pay. AlignOps FleetWatcher builds shift tickets from GPS and scale-ticket data using your clock rules and pay rates (hourly, per ton or per load). After approval, you email PDF invoices to haulers, who can dispute within a set window and log in to see only their own trucks, or you export to your ERP or payroll.

You never buy hardware. Devices are leased as part of the subscription and replaced free if they fail through no fault of yours. The only up-front cost is a one-time activation fee per device, and driver apps have none. Self-installation is free; on-site installation costs extra.

AlignOps FleetWatcher connects to plant and scale systems, existing GPS and camera providers, OEM portals and dispatch orders. It exports to ERPs such as Vista, Spectrum and JD Edwards through custom CSV templates, and an open API can push data to BI tools such as Power BI. Integrations are included in the per-unit price.

Agreements run 36 months, billed quarterly, with rates locked for the term. If you retire or sell a truck, you move its device to another asset, and a discounted buyout covers equipment you sell.

Customers typically cut hired trucking by 10–20%. One unit can pay for itself by stopping a single driver from padding half an hour, and fuel and productivity visibility add to the savings quickly.

No fleet is too small: customers run from 5–10 trucks a day to 300–400. The materials tools fit asphalt, aggregates and any repeating haul cycle, and the equipment tools fit heavy civil and earthwork fleets.

Yes for trucking cost. The trucking cost per ton report shows cost by shift and project, truck by truck and cycle by cycle, against your bid targets, in real time. Equipment hours are charged to jobs automatically by location.

Yes, with a defined scope, typically 1–2 months including hardware, software and onboarding. Because small pilots give limited data, the team often suggests a phased start, such as one crew.

Yes. Users are unlimited, and each user's access can be limited by module and project. Mechanics can see only maintenance, managers only their projects, DOT inspectors only flagged jobs and brokers only their own trucks. Data can also be filtered by division.

Generally no. Each unit's price includes dispatch, load cycle analysis, e-ticketing, shift tickets and hauler pay.

Partly. Devices bill every month of the term, including the off-season. Driver-app licenses work as a pool averaged over the quarter, so 20 licenses can cover 80 trucks on a peak day and none on others.

AI camera footage gives you an objective record when something happens on the road. Saved clips of harsh braking, phone use and rolling stops help you coach drivers before an incident, and dual-facing cameras add an in-cab view.